English
FrançaisRegulations
Page 22 of 140, showing 20 records out of 2786 total, starting on record 421, ending on 440
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US IEC 60086-2: 2011, Primary batteries — Part 2: Physical and electrical specifications | This Uganda Standard is applicable to primary batteries based on standardized electrochemical systems. It specifies the physical dimensions and the discharge test conditions and discharge performance requirements. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US IEC 60086-3: 2011, Primary batteries — Part 3: Watch batteries | This Uganda Standard specifies dimensions, designation, methods of tests and requirements for primary batteries for watches. In several cases, a menu of test methods is given. When presenting battery electrical characteristics and/or performance data, the manufacturer specifies which test method was used. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US IEC 60086-4: 2007, Primary batteries — Part 4: Safety of lithium batteries | This Uganda Standard specifies tests and requirements for primary batteries to ensure their safe operation under intended use and reasonably foreseeable misuse. | 0000-00-00 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US IEC 60086-5: 2011, Primary batteries — Part 5: Safety of batteries with aqueous electrolyte | This Uganda Standard specifies tests and requirements for primary batteries with aqueous electrolyte to ensure their safe operation under intended use and reasonably foreseeable misuse | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US 1565:2014, Standard specification for water emulsion floor polish | This Uganda Standard covers floor polish intended for use on all non-wood floors and on sealed-wood floors. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US 307:2014, Mosquito nets — Specification (3RD Edition) | This Uganda Standard specifies requirements for long lasting insecticidal mosquito nets intended for malaria vector control. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US 1583:2014, Fishing nets —Specification | This Uganda Standard specifies requirements for fishing nets. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US 1575:2014, Spring mattresses — Specification | This Uganda Standard specifies requirements and test methods for spring mattresses intended for institutional and domestic use. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US EAS 203:2014, Boxes for enclosure of electrical accessories — Specification (2nd Edition) | This Uganda Standard specifies requirements and methods of test for boxes intended to contain one or more electrical accessories and to be recessed into a wall, ceiling or similar flat-surfaced structure. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 205:2014, Controls for heating units in household electric ranges — Specification (2nd Edition) | This Uganda Standard specifies the requirements and test methods for control units for household electric ranges. It applies to multi-heat switches, energy regulators and thermostats including those for ovens, hotplates and rotisseries. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 168:2014, Junction boxes for use in electrical installations — Specification (2nd Edition) | This Uganda Standard specifies requirements and methods of sampling and test for junction boxes of surface or flush mounting types for use in fixed wiring installations. This standard applies to junction boxes used in a.c. and d.c. circuits where the rated voltage does not exceed 250 V and where the conductors are not subject to mechanical tension in normal use. It covers junction boxes having fixed terminals with capacity for cable conductors up to 10 mm2. It does not apply to junction boxes for use in conditions where special protection against the ingress of dust or moisture is required. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 811-1: 2014, Code of practice for safety of electrical installations — Part 1: General | This Uganda Standard specifies the terms and definitions, symbols and methods of earthing of electrical supply, communication facilities and associated equipment. It applies to all new and existing installations and extensions. This standard does not cover the earthed return of electric railways nor those lightning protection wires that are normally independent of supply or communication wires or equipment. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US 704: 2014; Absorbent cotton wool — Specification | This Uganda Standard specifies requirements and methods of test for absorbent cotton (surgical cotton or cotton wool) wool for medical use. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US EAS 811-2:2014, Code of practice for safety of electrical installations — Part 2: Installation and maintenance of electric supply stations and equipment | This Uganda Standard specifies the safety requirements for installations, operations and maintenance of electric supply stations. It also provides safety guidelines to personnel involved in electric supply stations and their associated structural arrangements that are accessible only to qualified personnel. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 811-3:2014, Code of practice for safety of electrical installations — Part 3 :Installation and maintenance of overhead electric supply and communication lines | This Uganda Standard specifies safety requirements for installation and maintenance of overhead electric supply and communication lines and their associated equipment. It prescribes the associated structural arrangements of such systems and the extension of such systems into buildings. It includes requirements for spacing, clearances, and strength of construction. This part of US EAS 811 does not apply to installations in electric supply stations except as required by US EAS 811-1. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 811-4:2014, Code of practice for safety of electrical installations — Part 4: Installation and maintenance of underground electric supply and communication lines | This Uganda Standard specifies safety requirements for the installation and maintenance of underground electric supply and communication lines. It prescribes the associated structural arrangements and the extension of such systems into buildings. It also covers the cables and equipment employed primarily for the utilization of electric power when such cables and equipment are used by the utility in the exercise of its function as a utility. This standard does not apply for installations in electric supply stations. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 811-5: 2014, Code of practice for safety of electrical installations — Part 5: Operation of electric supply lines, communication lines and equipment | This Uganda Standard specifies the practical work requirements to be followed during installation, operation and maintenance of electric supply and communications lines and equipment as a means of safeguarding employees and the public from injury. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US 1511:2014, Oxygen for medical use — Specification | This Uganda Standard specifies the requirements, methods of sampling and test requirements for oxygen for medical use only. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US EAS 290-2:2002, Polishes — Specification — Part 2: Floor polish solvent type (liquid and paste) | This Uganda Standard prescribes the requirements and the methods of test for solvent based floor polishes (liquid and paste). The standard applies to solvent based floor polishes liquid or paste, that are intended for use on all wooden and solvent-resistant floors. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 290-3:2002, Polishes — Specification — Part 3: Floor polish water emulsion buffable type | This Uganda Standard prescribes requirements and methods of test for water emulsion floor polish buffable type. This standard applies to a buffable water emulsion floor polish for general application on vinyl, thermoplastic, linoleum, rubber vinyl asbestos, asphalt terrazo, marble, cured concentrate ceramic and quarry tiles. It shall not be used on wooded, cork or magnesite floors unless these are properly sealed. Floor polish in this specification is for polishes used on floor areas that are subjected to heavy abraise foot traffic and any areas where buffing is desired. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
