English
FrançaisRegulations
Page 23 of 140, showing 20 records out of 2786 total, starting on record 441, ending on 460
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US EAS 294:2002, Scouring powders — Specification | This Uganda Standard specifies requirements and methods of test for synthetic household detergent scouring powder for the removal of tenacious soil from hard surfaces and kitchen utensils. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 295:2002, Sodium hypochlorite solutions for domestic use — Specification | This Uganda Standard specifies requirements for dilute solutions of sodium hypochlorite intended for domestic use. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 8124-1:2007, Safety of toys — Part 1: Safety aspects related to mechanical and physical properties (2nd Edition) | This Uganda Standard specifies the categories of flammable materials that are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a minor source of ignition. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 8124-2:2007, Safety of toys — Part 2: Flammability (2nd Edition) | This Uganda Standard specifies the categories of flammable materials that are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a minor source of ignition. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 8124-3:2010/Amd.1:2014, Safety of toys — Part 3: Migration of certain elements (2nd Edition) | This Uganda Standard specifies maximum acceptable levels and methods of sampling and extraction prior to analysis for the migration of the elements antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium from toy materials and from parts of toys. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 8124-4:2010, Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use | This Uganda Standard specifies requirements and test methods for activity toys for domestic family use intended for children under 14 years to play on or in. Products covered by this part of US ISO 8124 include swings, slides, seesaws, carousels, rocking toys, climbing frames, fully enclosed toddler swing seats and other products intended to bear the mass of one or more children. Products not included within the scope of this part of US ISO 8124 are: a) fitness and sporting equipment unless attached to the activity toy; b) equipment intended for use in schools, day care centres, kindergartens, public playgrounds, restaurants, shopping centres and similar public places; c) juvenile care products such as, but not limited to, infant swings, playpens/enclosures, beds or furniture including picnic tables, cradle rockers and products specifically designed for therapeutic use. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 9994: 2005 Lighters — Safety specification/ US ISO 9994: 2005/Amd.1: 2008, Lighters — Safety specification | This standard establishes requirements for lighters to ensure a reasonable degree of safety for normal use or reasonably foreseeable misuse of such lighters by users. The safety specification given in this Standard applies to all flame-producing products commonly known as cigarette lighters, cigar lighters and pipe lighters. It does not apply to matches, nor does it apply to other flame-producing products intended solely for igniting materials other than cigarettes, cigars, and pipes. The safety specification given in this standard cannot eliminate all hazards, but is intended to reduce potential hazards to users. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 356:2004, Code of practice for inspection and acceptance criteria for used textile products | This Uganda Standard prescribes a code of practice for the inspection and acceptance criteria for used textile products. It also applies to used garments of all types, sizes and fibre composition | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 4643:1992, Moulded plastics footwear — Lined or unlined poly(vinyl chloride) boots for general industrial use — Specification | This Uganda Standard specifies requirements for boots, moulded from poly(vinyl chloride) compounds, for general industrial use. The boots may be either fabric-lined or unlined and of any style from ankle boots to full thigh height inclusive. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 5423:1992, Moulded plastics footwear — Lined or unlined polyurethane boots for general industrial use — Specification | This Uganda Standard specifies requirements for boots, moulded from polyurethane compound, for general industrial use. The boots may be either fabric-lined or tinlined and of any style from ankle boots to full thigh height inclusive. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 20345: 2011, Personal protective equipment — Safety footwear | This Uganda Standard specifies basic and additional (optional) requirements for safety footwear used for general purpose. It includes, for example, mechanical risks, slip resistance, thermal risks, ergonomic behaviour. Special risks are covered by complementary job-related standards (e.g. footwear for firefighters, electrical insulating footwear, protection against chain saw injuries, protection against chemicals and molten metal splash, protection for motor cycle riders). | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 4706:2008, Gas cylinders — Refillable welded steel cylinders — Test pressure 60 bar and below | This Uganda Standard specifies the minimum requirements concerning material selection, design, construction and workmanship, procedure and test at manufacture of refillable welded-steel gas cylinders of a test pressure not greater than 60 bar1), and of water capacities from 0.5 l up to and including 500 l exposed to extreme worldwide temperatures (-50 °C to 65 °C) used for compressed, liquefied or dissolved gases. Transportable large cylinders of water capacity above 150 l and up to 500 l may be manufactured and certified to this standard provided handling facilities are provided. This standard is primarily intended to be used for industrial gases other than Liquefied Petroleum Gas (LPG), but may also be applied for LPG. For specific LPG applications see ISO 22991. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 7866:2012, Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing | This Uganda Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes and tests at time of manufacture of refillable seamless aluminium alloy gas cylinders of water capacities up to and including 150 litres for compressed, liquefied and dissolved gases for worldwide use (normally up to +65 °C). | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 9809-1: 2010, Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa | This Uganda Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable quenched and tempered seamless steel gas cylinders of water capacities from 0.5 l up to and including 150 l for compressed, liquefied and dissolved gases. This standard is applicable to cylinders with a maximum actual tensile strength Rma of less than 1 100 MPa. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 9809-2:2010, Gas cylinders — Refillable seamless steel gas cylinders —Design, construction and testing — Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa | This Uganda Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable quenched and tempered seamless steel gas cylinders of water capacities from 0.5 l up to and including 150 l for compressed, liquefied and dissolved gases. This part of US ISO 9809 is applicable to cylinders with a maximum tensile strength Rma ≥ 1 100 MPa. It is not applicable to cylinders with Rma, max >1 300 MPa for diameters >140 mm and guaranteed wall thicknesses a’ ≥ 12 mm and Rma, max >1 400 MPa for diameters ≤ 140 mm and guaranteed wall thicknesses a’ ≥ 6 mm, because beyond these limits, additional requirements can apply. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 9809-3:2010, Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 3: Normalized steel cylinders | This Uganda Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable normalized or normalized and tempered seamless steel gas cylinders of water capacities from 0.5 l up to and including 150 l for compressed, liquefied and dissolved gases. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 9809-4:2014, Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa | This Uganda Standard specifies the minimum requirements for the material, design, construction and workmanship, manufacturing processes, examinations, and tests at manufacture of refillable seamless stainless steel gas cylinders of water capacities from 0.5 l up to and including 150 l for compressed, liquefied, and dissolved gases. This part of US ISO 9809 is applicable to cylinders with a maximum actual tensile strength, Rma, of less than 1 100 MPa. | 0000-00-00 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 10461:2005, Gas cylinders — Seamless aluminium-alloy gas cylinders — Periodic inspection and testing | This Uganda Standard deals with seamless aluminium-alloy transportable gas cylinders intended for compressed and liquefied gases under pressure, of water capacity from 0.5 l to 150 l; it also applies, as far as practical, to cylinders of less than 0.5 l water capacity. This standard specifies the requirements for periodic inspection and testing to verify the integrity of such gas cylinders for further service. This standard does not apply to periodic inspection and testing of acetylene cylinders or composite cylinders with aluminium-alloy liners. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 11114-1:2012, Gas cylinders — Compatibility of cylinders and valve materials with gas contents — Part 1: Metallic materials | This Uganda Standard provides requirements for the selection of safe combinations of metallic cylinder and valve materials and cylinder gas content. The compatibility data given is related to single gases and to gas mixtures. Seamless metallic, welded metallic and composite gas cylinders and their valves, used to contain compressed, liquefied and dissolved gases, are considered. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 11118:1999, Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods | This Uganda Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes and tests at manufacture of non-refillable metallic gas cylinders of welded, brazed or seamless construction for compressed, liquefied and dissolved gases exposed to extreme worldwide ambient temperatures. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
