English
FrançaisRegulations
Page 32 of 140, showing 20 records out of 2786 total, starting on record 621, ending on 640
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 14114:1999, Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — General requirements | This Uganda Standard is applicable to acetylene cylinder manifold systems extending from the cylinder valve or the bundle outlet connections to the connection of the flame arrestor. It specifies requirements for design, materials and testing of cylinder manifold systems for the supply of acetylene for use in welding, cutting and allied processes. This standard applies to acetylene cylinder manifold systems in which up to 16 acetylene single cylinders or two acetylene bundles are coupled for collective gas withdrawal. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 29 September 2016 |
| US ISO 20815:2008, Petroleum, petrochemical and natural gas industries — Production assurance and reliability management | This Uganda Standard introduces the concept of production assurance within the systems and operations associated with exploration drilling, exploitation, processing and transport of petroleum, petrochemical and natural gas resources. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 10438-4:2007, Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 4:Self-acting gas seal support systems | This Uganda Standard in conjunction with US ISO 10438-1 specifies requirements for support systems for self-acting gas seals (dry gas seals), for example as described in ISO 10439 and ISO 10440-1. These systems can serve equipment such as compressors, gears, pumps and drivers. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US IEC 60076-5:2006, Power transformers — Part 5: Ability to withstand short circuit | This Uganda Standard identifies the requirements for power transformers to sustain without damage the effects of overcurrent originated by external short circuits. It describes the calculation procedures used to demonstrate the thermal ability of a power transformer to withstand such over currents and both the special test and the theoretical evaluation method used to demonstrate the ability to withstand the relevant dynamic effects. The requirements apply to transformers as defined in the scope of US IEC 60076-1. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO/TS 16976-3:2011, Respiratory protective devices — Human factors — Part 3: Physiological responses and limitations of oxygen and limitations of carbon dioxide in the breathing environment | This Uganda Standard gives: a description of the factors contributing to the present content of the Earth's atmosphere; a description of the physiology of human respiration; a survey of the current biomedical literature on the effects of carbon dioxide and oxygen on human physiology; examples of environmental circumstances where the partial pressure of oxygen or carbon dioxide can vary from that found at sea level. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US 310-1:2016, Cement — Part 1: Composition, specification and conformity criteria for common cements (2nd Edition) | This Uganda Standard gives the specifications which include mechanical, physical and chemical requirements of 27 distinct common cements, seven sulphate resisting common cements as well as three distinct low early strength blast furnace cements and two sulphate resisting low early strength blast cements and their constituents. (The Uganda Standardcancels and replaces US 310-1:2001, Cement — Part 1: Composition, specifications, and conformity criteria for common cements, which has been technically revised). | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 5826:2014, Resistance welding equipment — Transformers — General specifications applicable to all transformers | This Uganda Standard gives specifications applicable to the following types of transformers for use in resistance welding equipment:single-phase transformers for a.c. welding, typically operating at 50 Hz or 60 Hz;single-phase transformers with connected rectifier for d.c. welding, typically operating at 50 Hz or 60 Hz;single-phase inverter transformers with connected rectifier for d.c. welding, typically operating at 400 Hz to 2 kHz; andthree-phase transformers with connected rectifier for d.c. welding, typically operating at 50 Hz or 60 Hz.For the purposes of this standard, the term transformer can refer to the transformer alone or with connected rectifier (transformer-rectifier unit). This standard applies to transformers built to protection class I or II according to IEC 61140. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US IEC 60904-2:2015, Photovoltaic devices – Part 2: Requirements for photovoltaic reference devices | This Uganda Standard gives requirements for the classification, selection, packaging, marking, calibration and care of photovoltaic reference devices. This standard covers photovoltaic reference devices used to determine the electrical performance of photovoltaic cells, modules and arrays under natural and simulated sunlight. It does not cover photovoltaic reference devices for use under concentrated sunlight. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60904-2:2015, Photovoltaic devices – Part 2: Requirements for photovoltaic reference devices | This Uganda Standard gives requirements for the classification, selection, packaging, marking, calibration and care of photovoltaic reference devices. This standard covers photovoltaic reference devices used to determine the electrical performance of photovoltaic cells, modules and arrays under natural and simulated sunlight. It does not cover photovoltaic reference devices for use under concentrated sunlight. (This Uganda Standard cancels and replaces, US 463-2:2005 Photovoltaic devices — Part 2: Requirements for reference solar cells, which has been republished). | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 24 August 2016 |
| US ISO 14122-2:2016, Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways | This Uganda Standard gives requirements for non-powered working platforms and walkways which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, sliding) and movable parts of those fixed means of access. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 14122-3:2016, Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails | This Uganda Standard gives requirements for non-powered stairs, stepladders and guard-rails which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, slidable) and movable parts of those fixed means of access. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 14122-4:2016, Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders | This Uganda Standard gives requirements for fixed ladders which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, slidable) and movable parts of fixed ladder systems. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 14557:2002, Fire-fighting hoses — Rubber and plastics suction hoses and hose assemblies | This Uganda Standard gives requirements and test methods for rubber and plastics suction hoses for fire-fighting purposes. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 15156-3:2015, Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys | This Uganda Standard gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards, or regulations. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 15156-2:2015, Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons | This Uganda Standard gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 15547-1:2005, Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 1: Plate-and-frame heat exchangers | This Uganda Standard gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of plate-and-frame heat exchangers for use in petroleum, petrochemical and natural gas industries. It is applicable to gasketed, semi-welded and welded plate-and-frame heat exchangers | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 15547-2:2005, Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 2: Brazed aluminium plate-fin heat exchangers | This Uganda Standard gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of brazed aluminium plate-fin heat exchangers for use in petroleum, petrochemical and natural gas industries | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 13706:2011, Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers | This Uganda Standard gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of air-cooled heat exchangers for use in the petroleum, petrochemical and natural gas industries. This standard is applicable to air-cooled heat exchangers with horizontal bundles, but the basic concepts can also be applied to other configurations. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 3864-3:2012, Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs | This Uganda Standard gives principles, criteria and guidance for the design of graphical symbols for use in safety signs as defined in US ISO 3864 1, and for the safety sign element of product safety labels as defined in US ISO 3864 2. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 13534:2000, Petroleum and natural gas industries — Drilling and production equipment — Inspection, maintenance, repair and remanufacture of hoisting equipment | This Uganda Standard gives guidelines and establishes requirements for inspection, maintenance, repair and remanufacture of items of hoisting equipment used in drilling and production operations, in order to maintain the serviceability of this equipment. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
