English
FrançaisRegulations
Page 33 of 140, showing 20 records out of 2786 total, starting on record 641, ending on 660
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO/TS 16976-8:2013, Respiratory protective devices — Human factors — Part 8: Ergonomic factors | This Uganda Standard gives guidance on the generic ergonomic factors for the preparation of standards for performance requirements, testing and use of respiratory protective devices (RPD). It specifies principles relating to: the biomechanical interaction between RPD and the human body; the interaction between RPD and the human senses: vision, hearing, smell, taste and skin contact. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 12609-2:2013, Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications — Part 2: Guidance for use | This Uganda Standard gives guidance and information to users, manufacturers, suppliers, and safety advisors on the selection and use of eye protectors for intense light source (ILS) equipment used on humans and animals for cosmetic and medical applications against excessive exposure to optical radiation in the spectral range 250 nm to 3 000 nm, with the exception of laser radiation. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 14122-1:2016, Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access | This Uganda Standard gives general requirements for access to stationary machines and guidance about the correct choice of means of access when necessary access to the stationary machine is not possible directly from the ground level or from a floor. It is applicable to permanent means of access which are a part of a stationary machine, and also to non-powered adjustable parts (e.g. foldable, slidable) and movable parts of fixed means of access. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US IEC 61427-1:2013, Secondary cells and batteries for renewable energy storage — General requirements and methods of test — Part 1: Photovoltaic off-grid application | This Uganda Standard gives general information relating to the requirements for the secondary batteries used in photovoltaic energy systems and to the typical methods of test used for the verification of battery performances. This part deals with cells and batteries used in photovoltaic off-grid applications. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 3864-1:2011, Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs and safety markings | This Uganda Standard establishes the safety identification colours and design principles for safety signs and safety markings to be used in workplaces and in public areas for the purpose of accident prevention, fire protection, health hazard information and emergency evacuation. It also establishes the basic principles to be applied when developing standards containing safety signs. This standard is applicable to all locations where safety issues related to people need to be addressed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic and, generally speaking, to those sectors subject to a regulation which may differ. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 17680:2015, Tourism and related services -- Thalassotherapy -- Service requirements | This Uganda Standard establishes the requirements for the provision of services in thalassotherapy centres using marine environment's beneficial effects with curative or preventive purposes, aiming at ensuring -Good quality services responding to customer's implicit and explicit needs, -The respectful use of the thalassotherapy concept, -Very specifically, the implementation of hygiene and safety principles, and -The comfort to the customers. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 22810:2010, Horology — Water-resistant watches | This Uganda Standard establishes the requirements and specifies the test methods used to verify the water resistance of watches. Moreover, it indicates the marking which the manufacturer is authorized to apply to them. Divers' watches, specified as such, are covered by US ISO 6425 which establishes special requirements. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US ISO 15615:2013, Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — Safety requirements in high-pressure devices | This Uganda Standard establishes the general specifications, requirements and tests for devices located on the high-pressure side of acetylene manifold systems as defined in US ISO 14114. It does not cover the high-pressure piping, flexible hoses and the regulator. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 29 September 2016 |
| US ISO 8216-1:2005, Petroleum products — Fuels (class F) classification — Part 1: Categories of marine fuels | This Uganda Standard establishes the detailed classification of marine fuels within class F (petroleum fuels). It is intended to be read in conjunction with US ISO 8216-99. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 8216-2:1986, Petroleum products — Fuels (class F) — Classification — Part 2: Categories of gas turbine fuel marine applications | This Uganda Standard establishes the detailed classification of gas turbine fuels for industrial and marine applications, but excluding aircraft fuels. It should be read in conjunction with ISO 8216/0. The fuels in this classification are for use in industrial gas turbines and gas turbines derived from aviation turbines that are used in static and marine applications. The classification includes only fuels that are liquid under atmospheric pressure and at their normal storage temperatures. Petroleum fuels, being the result of the processing of crude oils of diverse origin, cannot be chemically defined, but may be categorized generally within the scope of this part of US ISO 8216. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 3864-4:2011, Graphical symbols — Safety colours and safety signs — Part 4: Colorimetric and photometric properties of safety sign materials | This Uganda Standard establishes the colorimetric and photometric requirements and test methods for the colours of safety signs to be used in workplaces and public areas. It provides the colorimetric and photometric specifications for the named safety and contrast colours prescribed in US ISO 3864-1. The physical requirements that safety signs have to meet are primarily related to daytime colour and normally lit environments. This standard also includes the colorimetric requirements and test methods for safety signs and phosphorescent material which also operate in unlit environments. US ISO 3864-4:2011 is applicable to all locations where safety issues related to people need to be addressed. However, it is not applicable to signalling used for guiding rail, road, river, maritime and air traffic and, generally speaking, to those sectors subject to a regulation that may differ. The colorimetric and photometric properties of retroreflective safety signs, retroreflective materials combined with fluorescent or phosphorescent materials, or luminous safety signs activated by a radioactive source are not specified in US ISO 3864-4:2011. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 3632-1:2011, Spices – Saffron (Crocus sativus L.) – Part 1: Specification | This Uganda Standard establishes specifications for dried saffron obtained from the pistils of Crocus sativus L. flowers. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 02 September 2016 |
| US ISO 10417:2004, Petroleum and natural gas industries — Subsurface safety valve systems — Design, installation, operation and redress | This Uganda Standard establishes requirements and provides guidelines for configuration, installation, test, operation and documentation of subsurface safety valve (SSSV) systems. In addition, this standard establishes requirements and provides guidelines for selection, handling, redress and documentation of SSSV downhole production equipment. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 10405:2000, Petroleum and natural gas industries — Care and use of casing and tubing | This Uganda Standard establishes practices for care and use of casing and tubing. It specifies practices for running and pulling casing and tubing, including drifting, stabbing, making up and lowering, field makeup, drifting and landing procedures. Also included are causes of trouble, as well as transportation, handling and storage, inspection and field welding of attachments. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US 1570:2014, Standard consumer safety specification for soft infant and toddler carriers | This Uganda Standard establishes performance requirements, test methods and marking requirements to promote safe use of soft infant and toddler carriers. | 0000-00-00 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US IEC 62509:2010, Battery charge controllers for photovoltaic systems — Performance and functioning | This Uganda Standard establishes minimum requirements for the functioning and performance of battery charge controllers (BCC) used with lead acid batteries in terrestrial photovoltaic (PV) systems. The main aims are to ensure BCC reliability and to maximize the life of the battery. This standard shall be used in conjunction with IEC 62093, which describes test and requirements for intended installation application. In addition to the battery charge control functions, this standard addresses the following battery charge control features: • photovoltaic generator charging of a battery, • load control, • protection functions, and • interface functions. This standard does not cover MPPT performance, but it is applicable to BCC units that have this feature. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US ISO 13009:2015, Tourism and related services — Requirements and recommendations for beach operation | This Uganda Standard establishes general requirements and recommendations for beach operators that offer tourist and visitor services. It provides guidance for both beach operators and users regarding the delivery of sustainable management and planning, beach ownership, sustainable infrastructure and service provision needs, including beach safety, information and communication, cleaning and waste removal. This standard is applicable to beaches during the bathing season. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 23601:2009, Safety identification — Escape and evacuation plan signs | This Uganda Standard establishes design principles for displayed escape plans that contain information relevant to fire safety, escape, evacuation and rescue of the facility's occupants. These plans may also be used by intervention forces in case of emergency. These plans are intended to be displayed as signs in public areas and workplaces. This standard is not intended to cover the plans to be used by external safety services nor detailed professional technical drawings for use by specialists. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 3864-2:2004, Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels | This Uganda Standard establishes additional principles to US ISO 3864-1 for the design of safety labels for products, i.e. any items manufactured and offered for sale in the normal course of commerce, including but not limited to consumer products and industrial equipment. The purpose of a product safety label is to alert persons to a specific hazard and to identify how the hazard can be avoided. This standard is applicable to all products in all industries where safety-related questions can be posed. However, it is not applicable to safety labels used for chemicals, for the transport of dangerous substances and preparations, and in those sectors subject to legal regulations which differ from certain provisions of this document. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 32:1977, Gas cylinders for medical use — Marking for identification of content | This Uganda Standard establishes a system of marking and a series of colours for the identification of the content of gas cylinders intended for medical use only. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
