Regulations

Page 94 of 140, showing 20 records out of 2786 total, starting on record 1861, ending on 1880

Title Description Implementation date Source Publication Created
US IEC 60086-3: 2011, Primary batteries — Part 3: Watch batteries This Uganda Standard specifies dimensions, designation, methods of tests and requirements for primary batteries for watches. In several cases, a menu of test methods is given. When presenting battery electrical characteristics and/or performance data, the manufacturer specifies which test method was used. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 10 September 2016
US IEC 60086-2: 2011, Primary batteries — Part 2: Physical and electrical specifications This Uganda Standard is applicable to primary batteries based on standardized electrochemical systems. It specifies the physical dimensions and the discharge test conditions and discharge performance requirements. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 10 September 2016
US IEC 60086-1: 2011, Primary batteries — General This Uganda Standard is intended to standardize primary batteries with respect to dimensions, nomenclature, terminal configurations, markings, test methods, typical performance, safety and environmental aspects. As a primary battery classification tool, electrochemical systems are also standardized with respect to system letter, electrodes, electrolyte, nominal and maximum open circuit voltage. This standard specifies test methods for testing primary cells and batteries. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 10 September 2016
US IEC 60227-7:2012, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 7: Flexible cables screened and unscreened with two or more conductors This Uganda Standard details the particular specifications for polyvinyl chloride insulated, screened and unscreened control cables of rated voltages up to and including 300/500 V. All cables comply with the appropriate requirements given in US IEC 60227-1 and each individual type of cable complies with the particular requirements of this part. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 10 September 2016
US IEC 60227-6: 2001, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 6: Lift cables and cables for flexible connections This Uganda Standard details the particular specifications for both circular and flat lift cables and cables for flexible connections of rated voltages up to and including 450/750 V. Each cable complies with the appropriate requirements given in US IEC 60227-1, and with the particular requirements of this part of US IEC 60227. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 10 September 2016
US IEC 60227-5:2011, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 5: Flexible cables (cords) 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 10 September 2016
TZS 1603: 2014 Textiles — Tarpaulins made from high density polyethylene woven fabric — Specification This measure has being issued to help manufacturers of tarpaulins to come up with products of defined quality. The tarpaulins made from laminated high density polyethylene (HDPE) woven fabric are light weight and have high mechanical strength, UV stabilized and long useful life. 2013-05-07 Tanzania Bureau of Standards (TBS) TZS 1603: 2014 10 September 2016
US IEC 60227-4:1997, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 4: Sheathed cables for fixed wiring This Uganda Standard details the particular specification for light polyvinyl chloride sheathed cables of rated voltage of 300/500 V. Each cable shall comply with the appropriate requirements given in US IEC 60227-1 and the particular requirements of this part. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 10 September 2016
TZS 1603: 2014 Textiles — Tarpaulins made from high density polyethylene woven fabric — Specification This measure has being issued to help manufacturers of tarpaulins to come up with products of defined quality. The tarpaulins made from laminated high density polyethylene (HDPE) woven fabric are light weight and have high mechanical strength, UV stabilized and long useful life. 2013-05-07 Tanzania Bureau of Standards (TBS) TZS 1603: 2014 10 September 2016
US IEC 60227-3:1997, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 3: Non-sheathed cables for fixed wiring This Uganda Standard details the particular specifications for polyvinyl chloride insulated single-core non-sheathed cables for fixed wiring of rated voltages up to and including 450/750V. All cables shall comply with the appropriate requirements given in US IEC 60227-1 and the individual types of cables shall each comply with the particular requirements of this part. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 10 September 2016
US IEC 60227-1:2007, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 1: General requirements (2nd Edition) This Uganda Standard applies to rigid and flexible cables with insulation, and sheath if any, based on polyvinyl chloride, of rated voltages Uo/U up to and including 450/750 V used in power installations of nominal voltage not exceeding 450/750 V a.c. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 10 September 2016
US IEC 62040-2:2005, Uninterruptible power systems (UPS) — Part 2: Electromagnetic compatibility (EMC) requirements (2nd Edition) This Uganda Standard applies to UPS units intended to be installed • as a unit or in UPS systems comprising a number of interconnected UPS and associated control/switchgear forming a single power system; and • in any operator accessible area or in separated electrical locations, connected to low-voltage supply networks for either industrial or residential, commercial and light industrial environments. This part of US IEC 62040 is intended as a product standard allowing the EMC conformity assessment of products of categories C1, C2 and C3 as defined in this standard, before placing them on the market. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 10 September 2016
US IEC 62040-1:2013, Uninterruptible power systems (UPS) — Part 1: General and safety requirements for UPS This Uganda Standard applies to uninterruptible power systems (UPS) with an electrical energy storage device in the d.c. link. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 10 September 2016
US IEC 62109-1:2010, Safety of power converters for use in photovoltaic power systems — Part 1: General requirements This Uganda Standard applies to the power conversion equipment (PCE) for use in Photovoltaic (PV) systems where a uniform technical level with respect to safety is necessary. This standard defines the minimum requirements for the design and manufacture of PCE for protection against electric shock, energy, fire, mechanical and other hazards. This standard provides general requirements applicable to all types of PV PCE. There are additional parts of this standard that provide specific requirements for the different types of power converters. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 10 September 2016
TZS 715: 2015 Crepe bandages — Specification This measure specifies requirements for crepe bandages used for surgical dressings. 2015-11-07 Tanzania Bureau of Standards (TBS) TZS 715: 2015 10 September 2016
US IEC 62509:2010, Battery charge controllers for photovoltaic systems — Performance and functioning This Uganda Standard establishes minimum requirements for the functioning and performance of battery charge controllers (BCC) used with lead acid batteries in terrestrial photovoltaic (PV) systems. The main aims are to ensure BCC reliability and to maximize the life of the battery. This standard shall be used in conjunction with IEC 62093, which describes test and requirements for intended installation application. In addition to the battery charge control functions, this standard addresses the following battery charge control features: • photovoltaic generator charging of a battery, • load control, • protection functions, and • interface functions. This standard does not cover MPPT performance, but it is applicable to BCC units that have this feature. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 10 September 2016
TZS 1705:2015 Fresh papaya This measure prescribes requirements for fresh (carica papayas) to be supplied in export and local specified markets. It also stipulates requirements for handling, grading and packaging of the produce. 2015-11-07 Tanzania Bureau of Standards (TBS) TZS 1705: 2015 10 September 2016
Automobile diesel fuel Specifies two grades of automotive diesel fuel suitable for use in compression ignition engines including high-speed engines. 2013-02-22 Statutory Instrument 23 0f 2013 10 September 2016
Diesel Specifies two grades of automobile diesel fuel suitable for use in compression ignition engines including high-speed engines 2016-02-22 10 September 2016
TZS 624: 2014 Synthetic organic liquid detergent for household use — Specification This measure prescribes the requirements and the method of sampling and test for synthetic liquid detergents for household use both for general purpose and dishwashing liquid detergent. 2014-12-18 Tanzania Bureau of Standards (TBS) TZS 624: 2014 10 September 2016
1 2 3...92 93 94 95 96...138 139 140