English
FrançaisNon-tariff Measures
Showing items 4541 to 4560 of 7642
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 4209-2:2012, Truck and bus tyres and rims (metric series) — Part 2: Rims
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the designations, contours and dimensions of drop-centre (one-piece) rims for use on trucks and buses.
- Reference of the measure
- US ISO 4209-2:2012
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Truck and bus tyres and rims (metric series)
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 12170:1996, Gas welding equipment — Thermoplastic hoses for welding and allied processes
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements of two types of thermoplastic hoses with maximum design working pressure of 1 MPa and of 2 MPa, used for flexible gas supply lines in specific fields of application as follows:small kits for brazing and welding in accordance with US ISO 14112;air-aspirated blowpipes for welding and allied processes;miniature welding such as jewellery work, dental work excluding acetylene applications; andarc welding with shielding gas.
- Reference of the measure
- US ISO 12170:1996
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Thermoplastic hoses for welding and allied processes
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 10499-1:1991, Industrial tyres and rims — Rubber solid tyres (metric series)or pneumatic tyre rims — Part 1: Designation, dimensions and marking
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the main requirements, including designations, dimensions of the metric series of rubber solid tyres for pneumatic tyre rims primarily intended for industrial machines for use on prepared surfaces. Rim contours fitting these tyres will be specified in a future part of ISO 3739.
- Reference of the measure
- US ISO 10499-1:1991
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Industrial tyres and rims — Rubber solid tyres (metric series)or pneumatic tyre rims
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 6362-2:2014, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the mechanical properties of wrought aluminium and aluminium alloy extruded rods/bars, tubes, and profiles for general engineering applications. It applies to extruded products.
- Reference of the measure
- US ISO 6362-2:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- wrought aluminium and aluminium alloy extruded rods/bars, tubes, and profiles
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 13363:2004, Rubber and plastics hoses for marine engine wet-exhaust systems — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for three types and two classes of hose. The hoses are intended for use in marine-engine wet-exhaust systems (where the exhaust gases are mixed with the discharge of cooling water).The three types are:type 1: a softwall hose, made of oil-resistant material, with a synthetic-fabric reinforcement;type 2: a hardwall hose, made of oil-resistant material, with a synthetic-fabric reinforcement with a helical wire embedded in it; andtype 3: a hose or tube (flexible connector), made of oil-resistant material, with or without a reinforcement or cover, intended for use in short lengths in locations where the connector is protected from mechanical damage.The two classes are:class A intended for diesel engines; andclass B intended for petrol engines, and for diesel engines with a very high exhaust temperature
- Reference of the measure
- US ISO 13363:2004
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Rubber and plastics hoses for marine engine wet-exhaust systems
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 461: 2013, Hair dyes — Part 1: Aryl diamine based formulated powders — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements, packaging, marking and methods of sampling and test for aryl diamine based formulated powder hair dyes. This standard only covers permanent powder hair dyes based on aryl di-amines which act as primary intermediates in dyes. It does not apply to vegetable-based hair dyes, metallic-based hair dyes and liquid hair dye. (This Uganda Standard cancels and replaces US 489:2003, Formulated powder, hair dyes, aryl diamine based — Specification, which has been technically revised and republished).
- Reference of the measure
- US EAS 461: 2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- aryl diamine based formulated powder hair dyes
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 10499-2:1998, Industrial tyres and rims — Rubber solid tyres (metric series)for pneumatic tyre rims — Part 2: Load ratings
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the load ratings of the metric series of rubber solid tyres for pneumatic tyre rims primarily intended for industrial vehicles for use on prepared surfaces. Designation, dimensions and marking are covered in US ISO 10499-1; rim contours fitting these tyres are specified in US ISO 3739-3.
- Reference of the measure
- US ISO 10499-2:1998
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Industrial tyres and rims — Rubber solid tyres (metric series)for pneumatic tyre rims
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 6362-3:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on shape and dimensions
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded rectangular bars, having thicknesses in the range from 2 mm up to 240 mm and widths in the range from 10 mm up to 600 mm. It applies to extruded rectangular bars.
- Reference of the measure
- US ISO 6362-3:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- wrought aluminium and aluminium alloy extruded rectangular bars
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 14113:2013, Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for rubber and plastics hose and hose assemblies for use with compressed, liquefied, and dissolved gases up to a maximum working pressure of 450 bar (45 MPa), within the ambient temperature range of −20 °C to +60 °C. This standard applies to hose assemblies used to connect industrial gas cylinders to manifolds or bundles prior to any pressure reduction stage. This standard does not cover rubber or thermoplastic hoses for welding, cutting, and allied processes (see US ISO 3821 and US ISO 12170). This standard does not apply to refrigerated liquefied gases or to liquefied petroleum gases (LPG).
- Reference of the measure
- US ISO 14113:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 786: 2013, Skin care creams, lotions and gels — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, packing, marking and methods of sampling and test for creams, lotions and gels for skin care. This standard does not apply to skin care products, for which therapeutic claims are made and also does not apply to non-emulsified lotions and gels. (This Uganda Standard cancels and replaces US 339:2006, Specification for creams, lotions and gels for skin care, which has been technically revised and republished).
- Reference of the measure
- US EAS 786: 2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- creams, lotions and gels for skin care
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 4210-2:2014, Cycles — Safety requirements for bicycles — Part 2:Requirements for city and trekking, young adult, mountain and racing bicycles
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies safety and performance requirements for the design, assembly, and testing of bicycles and sub-assemblies.
- Reference of the measure
- US ISO 4210-2:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Cycles — Safety requirements for bicycles
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 6362-4:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4: Profiles — Tolerances on shape and dimensions
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded profiles with a cross-section contained within a circumscribing circle not greater than 800 mm. This part of US ISO 6362 applies to extruded profiles for general engineering applications only.
- Reference of the measure
- US ISO 6362-4:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- wrought aluminium and aluminium alloy extruded profiles
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 14557:2002, Fire-fighting hoses — Rubber and plastics suction hoses and hose assemblies
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives requirements for rubber and plastics suction hoses for fire-fighting purposes.
- Reference of the measure
- US ISO 14557:2002
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Rubber and plastics suction hoses and hose assemblies
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 6742-1:2015, Cycles — Lighting and retroreflective devices — Part 1:Lighting and light signalling devices
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to lighting devices used on cycles intended to be used on public roads and, especially, bicycles complying with US ISO 4210 and US ISO 8098. This part of US ISO 6742 specifies the functions, safety requirements, photometric performance and test methods of lighting and signalling devices that can be used on cycles.
- Reference of the measure
- US ISO 6742-1:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Cycles — Lighting and retroreflective devices
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 6362-5:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 5: Round, square and hexagonal bars — Tolerances on shape and dimensions
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the tolerances on dimensions and shape of the following:
• wrought aluminium and aluminium alloy extruded round bars, having diameters in the range from 8 mm up to 350 mm;
• wrought aluminium and aluminium alloy extruded square and hexagonal bars, having widths across flats in the range from 10 mm up to 220 mm.
It applies to extruded round, square and hexagonal bars. - Reference of the measure
- US ISO 6362-5:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Wrought aluminium and aluminium alloys
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 15465:2004, Pipework — Stripwound metal hoses and hose assemblies
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements for the design, manufacture and testing of four principal types of stripwound metal hose and hose assemblies, of which only one type is for pressure applications. The four are: single overlap, unpacked and packed; double overlap, unpacked and packed, the last of these having maximum allowable pressures of up to 40 bar. These hoses and hose assemblies may be supplied in nominal sizes from DN 6 to DN 500 and may operate at temperatures up to 600 °C dependent on materials of construction
- Reference of the measure
- US ISO 15465:2004
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Stripwound metal hoses and hose assemblies
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 6742-2:2015, Cycles — Lighting and retroreflective devices — Part 2:Retroreflective devices
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to retro-reflective devices used on cycles intended to be used on public roads and, especially, bicycles complying with US ISO 4210 and US ISO 8098. This part of US ISO 6742 specifies photometric and physical requirements of retro-reflective devices.
- Reference of the measure
- US ISO 6742-2:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Cycles — Lighting and retroreflective devices
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 6362-6:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 6: Round, square, rectangular and hexagonal tubes — Tolerances on shape and dimensions
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded round bars having diameters in the range from 8 mm up to 350 mm; and square and hexagonal bars having widths across flats in the range from 10 mm up to 220 mm. It applies to extruded round, square and hexagonal bars.
- Reference of the measure
- US ISO 6362-6:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Wrought aluminium and aluminium alloys
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 16438:2012, Agricultural irrigation equipment — Thermoplastic collapsible hoses for irrigation — Specifications
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for reinforced and non-reinforced thermoplastic collapsible hoses, which are intended to be used as main and sub-main supply lines for the conveyance and distribution of water for irrigation at water temperatures up to 50 °C. It is applicable to irrigation hoses with nominal diameters between 40 mm and 500 mm and working pressures between 0,3 bar (0,03 MPa) and 6 bar (0,6 MPa). This standard is applicable to two types of hose configurations: distributor hose (with outlet connections) and plain hose (without outlet connections).
- Reference of the measure
- US ISO 16438:2012
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Thermoplastic collapsible hoses for irrigation
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 6742-3:2015, Cycles — Lighting and retroreflective devices — Part 3:Installation and use of lighting and retro-reflective devices
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to lighting and retro-reflective devices used on cycles intended to be used on public roads and, especially, bicycles complying with US ISO 4210 and US ISO 8098. This part of US ISO 6742 specifies the safety requirements and test methods of lighting and retro-reflective devices for fastening devices, control, (guidelines for maintenance), instructions for mounting and use.
- Reference of the measure
- US ISO 6742-3:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Cycles — Lighting and retroreflective devices
Countries/Regions affected by the measure.
B7: Product quality, safety or performance requirements
