English
FrançaisNon-tariff Measures
Showing items 4581 to 4600 of 7642
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 185:1993, Standard for nopal
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to modified stem of commercial varieties of nopals grown from Opuntia ficus indica, O. tomentosa, O. hyptiacantha, O. robusta, O. inermis, O. ondulata, of the Cactaceae family, to be supplied fresh to the consumer, after preparation and packaging. Nopals for industrial processing are excluded.
- Reference of the measure
- US CODEX STAN 185:1993
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- nopals
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 5171:2009, Gas welding equipment — Pressure gauges used in welding, cutting and allied processes
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for Bourdon-tube pressure gauges normally used with compressed gas systems at pressures up to 30 MPa (300 bar) in welding, cutting and allied processes. It also covers use for dissolved acetylene and for liquefied gases under pressure. It does not cover gauges for acetylene in acetylene-manufacturing plants
- Reference of the measure
- US ISO 5171:2009
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Pressure gauges used in welding, cutting and allied processes
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 10438-1:2007, Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies general requirements for lubrication systems, oil-type shaft-sealing systems, dry-gas face-type shaft-sealing systems and control-oil systems for general- or special-purpose applications. General-purpose applications are limited to lubrication systems. These systems can serve equipment such as compressors, gears, pumps and drivers. This part of US ISO 10438 is intended to be used in conjunction with US ISO 10438-2, US ISO 10438-3 or US ISO 10438-4, as appropriate.
- Reference of the measure
- US ISO 10438-1:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- shaft-sealing and control-oil systems and auxiliaries for Petroleum, petrochemical and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 16120-1:2011, Non-alloy steel rod for drawing and/or cold rolling — Part 1: General requirements
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to wire rod of non-alloy steel intended for wire drawing and/or cold rolling. The cross-section can be circular, oval, square, rectangular, hexagonal, octagonal, half-round or another shape, generally with at least 5 mm nominal dimension, and with a smooth surface.
- Reference of the measure
- US ISO 16120-1:2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Non-alloy steel rod
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 186:1993, Standard for prickly pear
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to the fruit of commercial varieties of prickly pears grown from Opuntia ficus indica, O. streptachanthae, and O. lindheimeiri, of the Cactaceae family, to be supplied fresh to the consumer, after preparation and packaging. Prickly pears for industrial processing are excluded
- Reference of the measure
- US CODEX STAN 186:1993
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- prickly pears
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 10438-2:2007, Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 2: Special-purpose oil systems
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard, in conjunction with of US ISO 10438-1, specifies requirements for oil systems for special purpose applications. These oil systems can provide lubrication oil, seal oil or both. These systems can serve equipment such as compressors, gears, pumps and drivers.
- Reference of the measure
- US ISO 10438-2:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- oil systems for Petroleum, petrochemical and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 16120-2:2011, Non-alloy steel rod for drawing and/or cold rolling — Part 2: Specific requirements for general purpose rod
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to general-purpose steel wire rod for drawing and/or cold rolling.
- Reference of the measure
- US ISO 16120-2:2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Non-alloy steel rod
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 187:1993, Standard for carambola
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to the fruit of commercial varieties of carambolas grown from Averrhoa carambola L., of the Oxalidaceae family, to be supplied fresh to the consumer, after preparation and packaging. Carambolas for industrial processing are excluded
- Reference of the measure
- US CODEX STAN 187:1993
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- carambolas
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 5175:1987, Equipment used in gas welding, cutting and allied processes — Safety devices for fuel gases and oxygen or compressed air — General specifications, requirements and tests
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard lays down the general specifications, requirements and tests of safety devices for fuel gases and oxygen or compressed air used downstream of cylinder or pipeline outlet regulators and of pipeline outlet valves, and upstream of blowpipes for welding, cutting and allied processes. lt does not specify location and combination of these devices in the gas system.
- Reference of the measure
- US ISO 5175:1987
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Safety devices for fuel gases and oxygen or compressed air in gas welding, cutting and allied processes
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 16120-3:2011, Non-alloy steel rod for drawing and/or cold rolling — Part 3: Specific requirements for nominal and rimmed substitute low carbon steel rod
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to wire rod made of low-carbon, low-silicon, rimmed and rimmed substitute steel with high ductility intended for drawing and/or cold rolling.
- Reference of the measure
- US ISO 16120-3:2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Non-alloy steel rod
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 196:1995, Standard for litchi
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to commercial varieties (cultivars) of litchis grown from Litchi chinensis Sonn., of the Sapindaceae family, to be supplied fresh to the consumer, after preparation and packaging. Litchis for industrial processing are excluded.
- Reference of the measure
- US CODEX STAN 196:1995
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- litchis
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 5182:2008, Resistance welding — Materials for electrodes and ancillary equipment
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the characteristics of materials for resistance welding electrodes and ancillary equipment which are used for carrying current and transmitting force to the work.
- Reference of the measure
- US ISO 5182:2008
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Materials for electrodes and ancillary equipment
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 16120-4:2011, Non-alloy steel rod for drawing and/or cold rolling — Part 4: Specific requirements for wire rod for special applications
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to steel wire rod with improved characteristics intended for drawing and/or cold rolling.
- Reference of the measure
- US ISO 16120-4:2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Non-alloy steel rod
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 204:1997, Standard for mangosteen
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to commercial varieties of mangosteens grown from Garcinia mangostana L., of the Guttiferae family, to be supplied fresh to the consumer, after preparation and packaging. Mangosteens for industrial processing are excluded.
- Reference of the measure
- US CODEX STAN 204:1997
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- mangosteens
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 5183-1:1998, Resistance welding equipment — Electrode adaptors, male taper 1:10 — Part 1: Conical fixing, taper 1:10
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the dimensions and tolerances of resistance spot welding electrode adaptors where the fixing element for the cap is a male taper of 1:10 and for which the electrode taper fits in conformance with US ISO 1089.
- Reference of the measure
- US ISO 5183-1:1998
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Electrode adaptors, male taper 1:10
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US IEC 61427-1:2013, Secondary cells and batteries for renewable energy storage — General requirements and methods of test — Part 1: Photovoltaic off-grid application
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives general information relating to the requirements for the secondary batteries used in photovoltaic energy systems and to the typical methods of test used for the verification of battery performances. This part deals with cells and batteries used in photovoltaic off-grid applications.
- Reference of the measure
- US IEC 61427-1:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- secondary batteries used in photovoltaic energy systems
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 213:1999, Standard for limes
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies tocommercial varieties of limes grown from Citrus latifolia Tanaka, of the Rutaceae family, to be supplied fresh to the consumer, after preparation and packaging. Limes for industrial processing are excluded.
- Reference of the measure
- US CODEX STAN 213:1999
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- limes
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 5183-2:2000, Resistance welding equipment — Electrode adaptors, male taper 1:10 — Part 2: Parallel shank fixing for end-thrust electrodes
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the dimensions and tolerances of resistance spot welding electrode adaptors where the fixing element for the cap is a male taper of 1:10 and a parallel shaft is used to fix the adaptor to the electrode holder in accordance with US ISO 8430-3.
- Reference of the measure
- US ISO 5183-2:2000
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Electrode adaptors, male taper 1:10
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 10438-3:2007, Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 3: General-purpose oil systems
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard, in conjunction with US ISO 10438-1, specifies requirements for oil systems for general purpose applications. These oil systems can provide lubrication oil, but not seal oil and can serve equipment such as compressors, gears, pumps.
- Reference of the measure
- US ISO 10438-3:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- oil systems for Petroleum, petrochemical and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US IEC 61427-2:2015; Secondary cells and batteries for renewable energy storage — General requirements and methods of test — Part 2: On-grid applications
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard relates to secondary batteries used in on-grid Electrical Energy Storage (EES) applications and provides the associated methods of test for the verification of their endurance, properties and electrical performance in such applications. The test methods are essentially battery chemistry neutral, i.e. applicable to all secondary battery types.
- Reference of the measure
- US IEC 61427-2:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- secondary batteries used in on-grid Electrical Energy Storage (EES)
Countries/Regions affected by the measure.
B7: Product quality, safety or performance requirements
