English
FrançaisNon-tariff Measures
Showing items 4561 to 4580 of 7642
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 6362-7:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the chemical composition of wrought aluminium and aluminium alloys.
- Reference of the measure
- US ISO 6362-7:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- wrought aluminium and aluminium alloys
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 143:1985, Standard for dates
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to commercially prepared whole dates in pitted or un-pitted styles packed ready for direct consumption. It does not apply to other forms such as pieces or mashed dates or dates intended for industrial purposes.
- Reference of the measure
- US CODEX STAN 143:1985
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- dates
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 17165-1:2007, Hydraulic fluid power — Hose assemblies — Part 1: Dimensions and requirements
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for hose assemblies that are manufactured from hoses that conform to US ISO 3949 and to all parts of US ISO 1436, US ISO 3862, US ISO 4079 and US ISO 11237 and hose fittings with elastomeric seals that conform to US ISO 12151-1, US ISO 12151-2, US ISO 12151-3 and ISO 12151-6. This part of US ISO 17165 contains information of the most important criteria for the selection of preferred types of hoses and hose fittings with elastomeric sealing for use in hydraulic fluid power applications.
- Reference of the measure
- US ISO 17165-1:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Hydraulic fluid power — Hose assemblies
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 6742-4:2015, Cycles — Lighting and retroreflective devices — Part 4: Lighting systems powered by the cycle’s movement
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to lighting systems used on cycles intended to be used on public roads and, especially, bicycles complying with US ISO 4210 and US ISO 8098. This part of US ISO 6742 specifies requirements and test methods for the performance of lighting systems powered by the cycle’s movement. It applies to light devices complying with US ISO 6742-1. Lighting systems include lighting devices and power supplied by cycle's movement such as generator.
- Reference of the measure
- US ISO 6742-4:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- cycles
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 209:2007, Aluminium and aluminium alloys — Chemical composition
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the designations indicating the chemical composition of aluminium and aluminium alloys.
- Reference of the measure
- US ISO 209:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- aluminium and aluminium alloys
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 159:1987, Standard for canned mangoes
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to canned mangoes
- Reference of the measure
- US CODEX STAN 159:1987
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- canned mangoes
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 23297:2008, Thermoplastics hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for eight classes and two types (construction with adhesive bond between layers and construction without adhesive bond between layers) of wire or synthetic yarn reinforced hydraulic hoses and hose assemblies of nominal size from 3,2 to 31,5. Each class has a single maximum working pressure for all sizes. Such hoses are suitable for use with hydraulic fluids HH, HL, HM, HR, and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C for grades A and B and −40 °C to +120 °C for grades C and D. This standard does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies. The hose assembly maximum working pressure is governed by the lowest maximum working pressure of the components
- Reference of the measure
- US ISO 23297:2008
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Thermoplastics hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 6742-5:2015, Cycles — Lighting and retroreflective devices — Part 5: Lighting systems not powered by the cycle’s movement
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to lighting systems used on cycles intended to be used on public roads and, especially, bicycles complying with US ISO 4210 and US ISO 8098. This part of US ISO 6742 specifies requirements and test methods for the performance of lighting systems not powered by the cycle’s movement. It applies to light devices complying with ISO 6742-1. Lighting systems include lighting devices and power not supplied by cycle’s movement such as battery.
- Reference of the measure
- US ISO 6742-5:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Cycles
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US 1642:2016, Domestic biogas stoves — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard covers construction, operation, safety requirements for stoves intended for use with domestic biogas systems.
- Reference of the measure
- US 1642:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- biogas stoves
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 174:1989, General standard for vegetable protein products
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to vegetable protein products (VPP) intended for use in foods, which are prepared by various separation and extraction processes from proteins from vegetable sources other than single cell protein
- Reference of the measure
- US CODEX STAN 174:1989
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- vegetable protein products (VPP)
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 669:2000, Resistance welding — Resistance welding equipment — Mechanical and electrical requirements
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to resistance welding equipment, to guns with inbuilt transformers and to complete movable welding equipment. The following types are included:
• single-phase equipment with alternating welding current;
• single-phase equipment with rectified welding current by rectification of the output of the welding transformer;
• single-phase equipment with inverter welding transformer;
• three-phase equipment with rectified welding current by rectification of the output of the welding transformer;
• three-phase equipment with a current rectification in the input of the welding transformer (sometimes called frequency convertor); and
• three-phase equipment with inverter welding transformers.
This standard applies neither to welding transformers sold separately nor to safety requirements - Reference of the measure
- US ISO 669:2000
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Resistance welding equipment
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 10427-1:2001, Petroleum and natural gas industries — Equipment for well cementing — Part 1: Casing bow-spring centralizers
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard provides minimum performance requirements, test procedures and marking requirements for casing bow-spring centralizers for the petroleum and natural gas industries. The procedures provide verification testing for the manufacturer’s design, materials and process specifications, and periodic testing to confirm the consistency of product performance.
- Reference of the measure
- US ISO 10427-1:2001
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Equipment for well cementing for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US 1643:2016, Domestic biogas lamp — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard covers construction, operation, safety requirements,for lamps intended for use with biogas
- Reference of the measure
- US 1643:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- biogas lamp
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 177:1991, Standard for grated desiccated coconut
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to desiccated coconut. This standard does not cover salted, sugared, flavoured or roasted products.
- Reference of the measure
- US CODEX STAN 177:1991
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- desiccated coconut
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 1089:1980, Electrode taper fits for spot welding equipment — Dimensions
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard lays down the taper dimensions and tolerances of electrode taper fits for spot welding electrode , electrode adaptors, electrode holders and similar parts.
- Reference of the measure
- US ISO 1089:1980
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- electrode taper fits for spot welding electrode , electrode adaptors, electrode holders and similar parts.
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US 194-1:2016, Nails — Part 1: Steel nails — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for preferred form and dimensions, tolerance on dimensions, finish and surface coating for the type of steel nails and of loose steel wire nails for general applications.
- Reference of the measure
- US 194-1:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Steel nails
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 183:1993, Standard for papaya
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to fruits of commercial varieties of papayas grown from Carica papaya L., of the Caricaceae family, to be supplied fresh to the consumer, after preparation and packaging. Papayas for industrial processing are excluded.
- Reference of the measure
- US CODEX STAN 183:1993
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- papaya
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 2503:2009, Gas welding equipment — Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for single or two-stage pressure regulators without flow metering devices for connection to gas cylinders used for compressed gases up to 300 bar 1) (30 MPa),dissolved acetylene,liquefied petroleum gases (LPG),methylacetylene-propadiene mixtures (MPS), andcarbon dioxide (CO2),for use in welding, cutting and allied processes. It does not cover pressure regulators having a nominal outlet pressure p2 > 20 bar. This standard also specifies requirements for single or two-stage pressure regulators with flow metering devices for connection to gas cylinders used for compressed gases or mixtures up to 300 bar (30 MPa), and carbon dioxide (CO2), for use in welding, cutting and allied processes. This standard does not cover pressure regulators intended for direct use on cylinder bundles.
- Reference of the measure
- US ISO 2503:2009
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 10431:1993, Petroleum and natural gas industries — Pumping units — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard lays down specification covering the design and rating of pumping units.
- Reference of the measure
- US ISO 10431:1993
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Pumping units for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 1461:2009, Hot dip galvanized coatings on fabricated iron and steel articles — Specification and test methods
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the general properties of coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not more than 2 % of other metals).
- Reference of the measure
- US ISO 1461:2009
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- fabricated iron and steel articles
Countries/Regions affected by the measure.
B7: Product quality, safety or performance requirements
