English
FrançaisNon-tariff Measures
Showing items 4601 to 4620 of 7642
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 214:1999, Standard for pummelos (citrus grandi)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to commercial varieties of pummelos grown from Citrus grandis (L.) Osbeck (syn. C. maxima Merr.), of the Rutaceae family, to be supplied fresh to the consumer, after preparation and packaging. Pummelos for industrial processing are excluded.
- Reference of the measure
- US CODEX STAN 214:1999
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- pummelos
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 5822:1988, Spot welding equipment — Taper plug gauges and taper ring gauges
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for taper plug and ring gauges used for the checking of type A, B and C tapers according to US ISO 1089.
- Reference of the measure
- US ISO 5822:1988
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- taper plug and ring gauges
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 10438-4:2007, Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 4:Self-acting gas seal support systems
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard in conjunction with US ISO 10438-1 specifies requirements for support systems for self-acting gas seals (dry gas seals), for example as described in ISO 10439 and ISO 10440-1. These systems can serve equipment such as compressors, gears, pumps and drivers.
- Reference of the measure
- US ISO 10438-4:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Self-acting gas seal support systems for Petroleum, petrochemical and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US IEC 60904-2:2015, Photovoltaic devices – Part 2: Requirements for photovoltaic reference devices
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives requirements for the classification, selection, packaging, marking, calibration and care of photovoltaic reference devices. This standard covers photovoltaic reference devices used to determine the electrical performance of photovoltaic cells, modules and arrays under natural and simulated sunlight. It does not cover photovoltaic reference devices for use under concentrated sunlight.
- Reference of the measure
- US IEC 60904-2:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- photovoltaic reference devices
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 215:1999, Standard for guavas
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to commercial varieties of guavas grown from Psidium guajava L., of the Myrtaceae family, to be supplied fresh to the consumer, after preparation and packaging. Guavas for industrial processing are excluded
- Reference of the measure
- US CODEX STAN 215:1999
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- guavas
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 5826:2014, Resistance welding equipment — Transformers — General specifications applicable to all transformers
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives specifications applicable to the following types of transformers for use in resistance welding equipment:single-phase transformers for a.c. welding, typically operating at 50 Hz or 60 Hz;single-phase transformers with connected rectifier for d.c. welding, typically operating at 50 Hz or 60 Hz;single-phase inverter transformers with connected rectifier for d.c. welding, typically operating at 400 Hz to 2 kHz; andthree-phase transformers with connected rectifier for d.c. welding, typically operating at 50 Hz or 60 Hz.For the purposes of this standard, the term transformer can refer to the transformer alone or with connected rectifier (transformer-rectifier unit). This standard applies to transformers built to protection class I or II according to IEC 61140.
- Reference of the measure
- US ISO 5826:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Transformers for use in resistance welding equipment
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US US IEC 61215-1:2016, Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 1: Test requirements
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard lays down IEC requirements for the design qualification and type approval of terrestrial photovoltaic (PV) modules suitable for long term operation in general open air climates, as defined in IEC 60721-2-1
- Reference of the measure
- US US IEC 61215-1:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- terrestrial photovoltaic (PV) modules
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 216:1999, Standard for chayotes
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to commercial varieties of chayotes grown from Sechium edule (Jacq.) Sw., of the Cucurbitaceae family, to be supplied fresh to the consumer, after preparation and packaging. Chayotes for industrial processing are excluded.
- Reference of the measure
- US CODEX STAN 216:1999
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- chayotes
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 5828:2001, Resistance welding equipment — Secondary connecting cables with terminals connected to water-cooled lugs — Dimensions and characteristics
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies dimensions and characteristics of secondary connecting cables which are aircooled over their length and with terminals connected to water-cooled lugs. The secondary connecting cables are used for connection between the secondary terminals of a welding transformer and the electrode holders.
- Reference of the measure
- US ISO 5828:2001
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Secondary connecting cables with terminals connected to water-cooled lugs
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 10439-2:2015, Petroleum, chemical and gas service industries ⎯ Axial and centrifugal compressors and expander compressors ⎯ Part 2: Non-integrally geared centrifugal and axial compressors
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. This part of US ISO 10439 specifies requirements for non-integrally geared centrifugal and axial compressors, in addition to the general requirements specified in US ISO 10439-1. These machines do not have gears integral with their casing but can have external gears.
- Reference of the measure
- US ISO 10439-2:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Axial and centrifugal compressors and expander compressors for Petroleum, chemical and gas service industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US IEC 61215-1-1:2016, Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard lays down IEC requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open air climates, as defined in IEC 60721-2-1
- Reference of the measure
- US IEC 61215-1-1:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- crystalline silicon photovoltaic (PV) modules
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 218:1999, Standard for ginger
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to the rhizome of commercial varieties of ginger grown from Zingiber officinale Roscoe, of the Zingiberaceae family, to be supplied fresh to the consumer, after preparation and packaging. Ginger for industrial processing is excluded.
- Reference of the measure
- US CODEX STAN 218:1999
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- ginger
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7291:2010, Gas welding equipment — Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for pressure regulators in manifold systems used in welding, cutting, and allied processes for: compressed gases up to 30 MPa (300 bar);dissolved acetylene;liquefied petroleum gases (LPG);methylacetylene-propadiene-mixtures (MPS);carbon dioxide (CO2).It is not applicable to pressure regulators fitted directly to the gas cylinders, as defined in US ISO 2503.
- Reference of the measure
- US ISO 7291:2010
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar)
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 10439-3:2015, Petroleum, chemical and natural gas service industries — Axial and centrifugal compressors and expander compressors — Part 3: Integrally geared centrifugal compressors
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies minimum requirements and gives recommendations for axial compressors, single-shaft and integrally geared process centrifugal compressors, and expander compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. This part of US ISO 10439 specifies integrally geared centrifugal compressors in conjunction with US ISO 10439‑1.
- Reference of the measure
- US ISO 10439-3:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Axial and centrifugal compressors and expander compressors for Petroleum, chemical and natural gas service industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US IEC 61215-2:2016, Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 2: Test procedures
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard lays down IEC requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open air climates, as defined in IEC 60721-2-1. This part of US IEC 61215 is intended to apply to all terrestrial flat plate module materials such as crystalline silicon module types as well as thin-film modules.
- Reference of the measure
- US IEC 61215-2:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- terrestrial photovoltaic modules
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 219:1999, Standard for grapefruits (Citrus paradisi)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to commercial varieties of grapefruits grown from Citrus paradisi Macfad., of the Rutaceae family, to be supplied fresh to the consumer, after preparation and packaging. Grapefruits for industrial processing are excluded.
- Reference of the measure
- US CODEX STAN 219:1999
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- grapefruits
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7931: 1985, Insulation taps and bushes for resistance welding equipment
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies dimensions and requirements for insulated taps and bushes in the secondary circuit for resistance welding equipment, especially for use in back-ups according to ISO 5827.
- Reference of the measure
- US ISO 7931: 1985
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Insulation taps and bushes for resistance welding equipment
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 13623: 2009, Petroleum and natural gas industries — Pipeline transportation systems
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements and gives recommendations for the design, materials, construction, operation, maintenance and abandonment of pipeline systems used for transportation in the petroleum and natural gas industries.
- Reference of the measure
- US ISO 13623: 2009
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Pipeline transportation systems for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US IEC 60432-1:1999+AMD1:2005+AMD2:2011, Incandescent lamps — Safety specifications — Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the safety and interchangeability requirements of tungsten filament incandescent lamps for general lighting service
- Reference of the measure
- US IEC 60432-1:1999+AMD1:2005+AMD2:2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- incandescent lamps
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 220:1999, Standard for longans
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to commercial varieties of longans grown from Dimocarpus longan Lour., of the Sapindaceae family, to be supplied fresh to the consumer, after preparation and packaging. Longans for industrial processing are excluded.
- Reference of the measure
- US CODEX STAN 220:1999
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- longans
Countries/Regions affected by the measure.
B7: Product quality, safety or performance requirements
