English
FrançaisNon-tariff Measures
Showing items 4621 to 4640 of 7642
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 8430-1:1988, Resistance spot welding — Electrode holders — Part 1: Taper fixing 1:10
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the dimensions and tolerances of resistance spot welding electrode holders (type AI without offset and with the facility for cable clamping, and where a male taper 1:10 is used to fix the holder directly to the welding cylinder in multiple spot welding equipment.
- Reference of the measure
- US ISO 8430-1:1988
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Resistance spot welding — Electrode holders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 13680:2010, Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the technical delivery conditions for corrosion-resistant alloy seamless tubulars for casing, tubing and coupling stock.
- Reference of the measure
- US ISO 13680:2010
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US IEC 60095-1:2006, Lead-acid starter batteries — Part 1: General requirements and methods of test
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to lead-acid batteries with a nominal voltage of 12 V, used primarily as a power source for the starting of internal combustion engines, lighting and for auxiliary equipment of internal combustion engine vehicles. These batteries are commonly called "starter batteries". This standard specifies general requirements; essential functional characteristics, for several classes of starter batteries; according to the general type of application; and according to the type of product.
- Reference of the measure
- US IEC 60095-1:2006
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- lead-acid batteries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 224:2001, Standard for tannia
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to the tubercles of commercial varieties of lilac tannia grown from Xanthosoma violaceum Schott and white tannia grown from Xanthosoma sagittifolium (L.) Schott, of the Araceae family, to be supplied fresh to the consumer, after preparation and packaging. Tannias for industrial processing are excluded.
- Reference of the measure
- US CODEX STAN 224:2001
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- tannia
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 8430-2:1988, Resistance spot welding — Electrode holders — Part 2: Morse taper fixing
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the dimensions and tolerances of resistance spot welding electrode holders (type 9) without offset and with a facility for cable clamping, and where a male Morse taper is used to fix the holder directly to the welding cylinder in multiple spot welding equipment.
- Reference of the measure
- US ISO 8430-2:1988
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Resistance spot welding — Electrode holders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 13706:2011, Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives requirements and recommendations for the design, materials, fabrication, and preparation for shipment of air-cooled heat exchangers for use in the petroleum, petrochemical and natural gas industries. This standard is applicable to air-cooled heat exchangers with horizontal bundles, but the basic concepts can also be applied to other configurations.
- Reference of the measure
- US ISO 13706:2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Air-cooled heat exchangers for Petroleum, petrochemical and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US IEC 60095-2:2009, Lead-acid starter batteries — Part 2: Dimensions of batteries and dimensions and marking of terminals
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to lead-acid batteries used for starting, lighting and ignition of passenger cars and light vehicles with a nominal voltage of 12 V.
- Reference of the measure
- US IEC 60095-2:2009
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- lead-acid batteries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 225:2001, Standard for asparagus
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to shoots of commercial varieties of asparagus grown from Asparagus officinalis L., of the Liliaceae family, to be supplied fresh to the consumer, after preparation and packaging. Asparagus for industrial processing is excluded.
- Reference of the measure
- US CODEX STAN 225:2001
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- asparagus
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 8430-3:1988, Resistance spot welding — Electrode holders — Part 3: Parallel shank fixing for end thrust
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the dimensions and tolerances of resistance spot welding electrode holders (type C) without offset and with a facility for cable clamping, and where a clamp is used to fix the holder directly to the welding cylinder in multiple spot welding equipment.
- Reference of the measure
- US ISO 8430-3:1988
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Resistance spot welding — Electrode holders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 13707:2000, Petroleum and natural gas industries ⎯ Reciprocating compressors
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard covers the minimum requirements for reciprocating compressors and their drivers used in the petroleum and natural gas industries with either lubricated or no lubricated cylinders.
- Reference of the measure
- US ISO 13707:2000
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Reciprocating compressors for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US IEC 60076-1:2011, Power transformers — Part 1: General
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to three-phase and single-phase power transformers (including auto-transformers) with the exception of certain categories of small and special transformers such as: single-phase transformers with rated power less than 1 kVA and three-phase transformers less than 5 kVA; transformers, which have no windings with rated voltage higher than 1 000 V; instrument transformers; amongst others.
- Reference of the measure
- US IEC 60076-1:2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- power transformers
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 226:2001, Standard for cape gooseberry
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to commercial varieties of cape gooseberries grown from Physalis peruviana (L.), of the Solanaceae family, to be supplied fresh to the consumer, after preparation and packaging. Cape gooseberries for industrial processing are excluded.
- Reference of the measure
- US CODEX STAN 226:2001
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- gooseberries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 9012:2008, Gas welding equipment — Air-aspirated hand blowpipes — Specifications and tests
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for air-aspirated hand blowpipes. This standard applies to blowpipes for brazing, soldering, heating, fusion and other allied thermal processes, which use a fuel gas and aspirated air (injector-type blowpipes), and are intended for manual use. This International Standard is applicable to:air-aspirated hand blowpipes which are fed with a fuel gas in the gaseous phase, at a controlled pressure by a regulator, through a gas supply hose;air-aspirated hand blowpipes which are fed with a liquefied fuel gas in the gaseous phase at the container pressure, through a gas supply hose; andso-called liquid-phase blowpipes which are fed with a fuel gas in the liquid phase, and where thermal evaporation takes place within the blowpipe. It does not apply to blowpipes in which the fuel gas leaves the injector in the liquid phase, or to so-called “cartridge” blowpipes where the gas supply is fixed directly onto the blowpipe and possibly constitutes the shank.
- Reference of the measure
- US ISO 9012:2008
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Gas welding equipment — Air-aspirated hand blowpipes
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 13709:2009, Centrifugal pumps for petroleum, petrochemical and natural gas industries
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. This standard is applicable to overhung pumps, between-bearings pumps and vertically suspended pumps. Clause 9 provides requirements applicable to specific types of pump. All other clauses of this standard are applicable to all pump types. Illustrations are provided of the various specific pump types and the designations assigned to a specific type.
- Reference of the measure
- US ISO 13709:2009
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Centrifugal pumps for petroleum, petrochemical and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 241:2003, Standard for canned bamboo shoots
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to canned bamboo shoots, complying with the characteristics of edible varieties from species of bamboo shoots and offered for direct consumption, including for catering purposes, repacking or further processing
- Reference of the measure
- US CODEX STAN 241:2003
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- bamboo shoots
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 9090:1989, Gas tightness of equipment for gas welding and allied processes
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the maximum external leakage rates which are acceptable for equipment used for welding, cutting and allied processes. It applies to individual components which are used in the gas supply to a blowpipe from the connecting point of the hose (outlet of the cylinder valve or connecting point to a gas supply plant). It does not apply to gas supply plants.
- Reference of the measure
- US ISO 9090:1989
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Gas tightness of equipment for gas welding and allied processes
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 13710: 2004, Petroleum, petrochemical and natural gas industries — Reciprocating positive displacement pumps
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for reciprocating positive-displacement pumps and pump units for use in the petroleum, petrochemical and natural gas industries. It is applicable to both direct-acting and power-frame types.
- Reference of the measure
- US ISO 13710: 2004
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Reciprocating positive displacement pumps for Petroleum, petrochemical and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 242:2003, Standard for canned stone fruits
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to canned stone fruits of the genus Prunus, and offered for direct consumption, including for catering purposes or for repacking if required. It does not apply to the product when indicated as being intended for further processing.
- Reference of the measure
- US CODEX STAN 242:2003
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- canned stone fruits
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US IEC 60076-5:2006, Power transformers — Part 5: Ability to withstand short circuit
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard identifies the requirements for power transformers to sustain without damage the effects of overcurrent originated by external short circuits. It describes the calculation procedures used to demonstrate the thermal ability of a power transformer to withstand such over currents and both the special test and the theoretical evaluation method used to demonstrate the ability to withstand the relevant dynamic effects. The requirements apply to transformers as defined in the scope of US IEC 60076-1.
- Reference of the measure
- US IEC 60076-5:2006
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- power transformers
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 255:2007, Standard for table grapes
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to commercial varieties (cultivars) of table grapes grown from Vitis vinifera L., of the Vitaceae family, to be supplied fresh to the consumer, after preparation and packaging. Grapes for industrial processing are excluded.
- Reference of the measure
- US CODEX STAN 255:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- table grapes
Countries/Regions affected by the measure.
B7: Product quality, safety or performance requirements
