English
FrançaisNon-tariff Measures
Showing items 4941 to 4960 of 7642
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 10425:2003, Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms of acceptance
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the minimum requirements and terms of acceptance for the manufacture and testing of steel wire ropes not exceeding rope grade 2160 for the petroleum and natural gas industries.
- Reference of the measure
- US ISO 10425:2003
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- steel wire ropes not exceeding rope grade 2160 for the petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 31: 2013, Laundry soap — Specification (2nd Edition
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, sampling and test methods for two grades of laundry soaps. This standard covers two grades of laundry soap pure and built laundry soap in the form of cakes, tablets or bars, produced from vegetable or animal oils or fats or a blend of all or part to these materials. It does not cover liquid soap for household purposes, and bar soap, in which synthetic detergents have been added to enhance its performance.
- Reference of the measure
- US EAS 31: 2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Laundry soap
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 10432:2004, Petroleum and natural gas industries — Downhole equipment — Subsurface safety valve equipment
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard provides the minimum acceptable requirements for subsurface safety valves (SSSVs). It covers subsurface safety valves including all components that establish tolerances and/or clearances which may affect performance or interchangeability of the SSSVs. It includes repair operations and the interface connections to the flow control or other equipment, but does not cover the connections to the well conduit.
- Reference of the measure
- US ISO 10432:2004
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- subsurface safety valves (SSSVs)
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 127-1: 2013, Synthetic detergent powders — Specification — Part 1: Household hand use (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements and methods of sampling and test for synthetic detergents for household use. This standard does not cover machine wash and industrial detergent powders.
- Reference of the measure
- US EAS 127-1: 2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Synthetic detergent powders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 15156-2:2015, Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations.
- Reference of the measure
- US ISO 15156-2:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- carbon and low-alloy steels for service in equipment used in oil and natural gas production and natural gas treatment plants
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 15156-3:2015, Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards, or regulations.
- Reference of the measure
- US ISO 15156-3:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants
Countries/Regions affected by the measure.
-
Applied by Uganda on the entire world for 0409.00.00: Natural honey.
The measure came into effect on 01 October 2004
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 01 October 2004
- Publication where the measure is specified
- STATUTORY INSTRUMENTS 2004 No. 73. THE ANIMAL DISEASES (CONTROL OF BEE DISEASES) RULES, 2004
- Regulation where the measure is specified
- the Animal Diseases (Control of BeeDiseases)Rules, 2004.
- Country/Region applying the measure
- Uganda
- Coded list of objectives
- A: Protection of human life and health
- Description of the measure
- A person who produces, sells, distributes, imports or offers honey for export Shall ensure that the honey or its by-products conforms to the minimum standards of quality prescribed by the Uganda National Bureau of Standards, the codex standards12-2001 and any other law in force
- Reference of the measure
- Section 18
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 0409.00.00 Natural honey. No - Description
- Honey
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world 01 October 2004 - Description
- All countries
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 17348:2016, Petroleum and natural gas industries — Materials selection for high content CO2 for casing, tubing and downhole equipment
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard provides guidelines and requirements for material selection of both seamless casing and tubing, and downhole equipment for CO2 gas injection and gas production wells with high pressure and high CO2 content environments [higher than 10 % (molar) of CO2 and 1 MPa CO2 partial pressure]. Oil production wells are not covered in this standard. This standard only considers materials compatibility with the environment.
- Reference of the measure
- US ISO 17348:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- seamless casing and tubing
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US IEC 62509:2010, Battery charge controllers for photovoltaic systems — Performance and functioning
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard establishes minimum requirements for the functioning and performance of battery charge controllers (BCC) used with lead acid batteries in terrestrial photovoltaic (PV) systems. The main aims are to ensure BCC reliability and to maximize the life of the battery. This standard shall be used in conjunction with IEC 62093, which describes test and requirements for intended installation application. In addition to the battery charge control functions, this standard addresses the following battery charge control features:
• photovoltaic generator charging of a battery,
• load control,
• protection functions, and
• interface functions.
This standard does not cover MPPT performance, but it is applicable to BCC units that have this feature. - Reference of the measure
- US IEC 62509:2010
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- battery charge controllers (BCC)
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 10441:2007, Petroleum, petrochemical and natural gas industries — Flexible couplings for mechanical power transmission — Special-purpose applications
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements for couplings for the transmission of power between the rotating shafts of two machines in special-purpose applications in the petroleum, petrochemical and natural gas industries. Such applications are typically in large and/or high speed machines, in services that can be required to operate continuously for extended periods, are often unspared and are critical to the continued operation of the installation.
- Reference of the measure
- US ISO 10441:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- couplings for the transmission of power
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US IEC 62109-1:2010, Safety of power converters for use in photovoltaic power systems — Part 1: General requirements
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to the power conversion equipment (PCE) for use in Photovoltaic (PV) systems where a uniform technical level with respect to safety is necessary. This standard defines the minimum requirements for the design and manufacture of PCE for protection against electric shock, energy, fire, mechanical and other hazards. This standard provides general requirements applicable to all types of PV PCE. There are additional parts of this standard that provide specific requirements for the different types of power converters.
- Reference of the measure
- US IEC 62109-1:2010
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- power conversion equipment (PCE)
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 13691:2001, Petroleum and natural gas industries — High-speed special-purpose gear units
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the minimum requirements for enclosed, precision, single and double helical, one- and two-stage speed increasers and reducers of parallel shaft design with pinion speeds of 3000 min−1 or greater, or pitch line velocities of 25 m/s or greater, for special purpose applications.
- Reference of the measure
- US ISO 13691:2001
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- enclosed, precision, single and double helical, one- and two-stage speed increasers and reducers of parallel shaft design with pinion speeds of 3000 min−1 or greater, or pitch line velocities of 25 m/s or greater, for special purpose applications.
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US IEC 62040-1:2013, Uninterruptible power systems (UPS) — Part 1: General and safety requirements for UPS
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to uninterruptible power systems (UPS) with an electrical energy storage device in the d.c. link.
- Reference of the measure
- US IEC 62040-1:2013,
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- uninterruptible power systems (UPS)
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 15547-1:2005, Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 1: Plate-and-frame heat exchangers
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of plate-and-frame heat exchangers for use in petroleum, petrochemical and natural gas industries. It is applicable to gasketed, semi-welded and welded plate-and-frame heat exchangers
- Reference of the measure
- US ISO 15547-1:2005
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- plate-and-frame heat exchangers for use in petroleum, petrochemical and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US IEC 62040-2:2005, Uninterruptible power systems (UPS) — Part 2: Electromagnetic compatibility (EMC) requirements (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to UPS units intended to be installed
• as a unit or in UPS systems comprising a number of interconnected UPS and associated control/switchgear forming a single power system; and
• in any operator accessible area or in separated electrical locations, connected to low-voltage supply networks for either industrial or residential, commercial and light industrial environments.
This part of US IEC 62040 is intended as a product standard allowing the EMC conformity assessment of products of categories C1, C2 and C3 as defined in this standard, before placing them on the market. - Reference of the measure
- US IEC 62040-2:2005
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Uninterruptible power systems (UPS)
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 15547-2:2005, Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 2: Brazed aluminium plate-fin heat exchangers
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of brazed aluminium plate-fin heat exchangers for use in petroleum, petrochemical and natural gas industries
- Reference of the measure
- US ISO 15547-2:2005
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- brazed aluminium plate-fin heat exchangers for use in petroleum, petrochemical and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US IEC 60227-1:2007, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 1: General requirements (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to rigid and flexible cables with insulation, and sheath if any, based on polyvinyl chloride, of rated voltages Uo/U up to and including 450/750 V used in power installations of nominal voltage not exceeding 450/750 V a.c.
- Reference of the measure
- US IEC 60227-1:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Polyvinyl chloride insulated cables
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US IEC 60227-3:1997, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 3: Non-sheathed cables for fixed wiring
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard details the particular specifications for polyvinyl chloride insulated single-core non-sheathed cables for fixed wiring of rated voltages up to and including 450/750V. All cables shall comply with the appropriate requirements given in US IEC 60227-1 and the individual types of cables shall each comply with the particular requirements of this part.
- Reference of the measure
- US IEC 60227-3:1997
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- polyvinyl chloride insulated single-core non-sheathed cables
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US IEC 60227-4:1997, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 4: Sheathed cables for fixed wiring
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard details the particular specification for light polyvinyl chloride sheathed cables of rated voltage of 300/500 V. Each cable shall comply with the appropriate requirements given in US IEC 60227-1 and the particular requirements of this part.
- Reference of the measure
- US IEC 60227-4:1997
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- polyvinyl chloride sheathed cables
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-21:2005, Fire detection and alarm systems — Part 21: Routing equipment
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, for fire-alarm routing (transmitting) equipment (see US ISO 7240-1) and for fault (trouble) warning routing equipment (see US ISO 7240-1) for use in fire detection and fire alarm systems installed in buildings.
- Reference of the measure
- US ISO 7240-21:2005
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fire detection and alarm systems —Routing equipment
Countries/Regions affected by the measure.
B7: Product quality, safety or performance requirements
