English
FrançaisNon-tariff Measures
Showing items 4961 to 4980 of 7642
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 9241-161:2016, Ergonomics of human-system interaction — Part 161: Guidance on visual user-interface elements
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard describes visual user-interface elements presented by software and provides requirements and recommendations on when and how to use them.
- Reference of the measure
- US ISO 9241-161:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- visual user-interface elements
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US IEC 60227-5:2011, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 5: Flexible cables (cords)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard details the particular specifications for polyvinyl chloride insulated flexible cables (cords), of rated voltages up to and including 300/500 V. All cables comply with the appropriate requirements given in IEC 60227-1 and each individual type of cable complies with the particular requirements of this part.
- Reference of the measure
- US IEC 60227-5:2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Polyvinyl chloride insulated cables
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-22:2007, Fire detection and alarm systems — Part 22: Smoke-detection equipment for ducts
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, for smoke-detection equipment for ducts (s.d.e.d.) for use in fire-detection and fire alarm systems installed in buildings (see US ISO 7240-1). The s.d.e.d. samples the air from a duct and detects smoke in the sample.
- Reference of the measure
- US ISO 7240-22:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Smoke-detection equipment for ducts
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 14122-1:2016, Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives general requirements for access to stationary machines and guidance about the correct choice of means of access when necessary access to the stationary machine is not possible directly from the ground level or from a floor. It is applicable to permanent means of access which are a part of a stationary machine, and also to non-powered adjustable parts (e.g. foldable, slidable) and movable parts of fixed means of access.
- Reference of the measure
- US ISO 14122-1:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- stationary machines
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-23:2013, Fire detection and alarm systems — Part 23: Visual alarm devices
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements, for visual alarm devices in a fixed installation intended to signal a visual warning of a fire between a fire detection and alarm system and occupants in and around buildings. This standard specifies visual alarm devices for three types of application environment. It is only applicable to pulsing or flashing visual alarm devices, for example xenon beacons or rotating beacons. It is not applicable to devices giving continuous light output. This standard is not intended to cover visual indicators, for example, on detectors or on the control and indicating equipment.
- Reference of the measure
- US ISO 7240-23:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fire detection and alarm systems — Visual alarm devices
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 14122-2:2016, Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives requirements for non-powered working platforms and walkways which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, sliding) and movable parts of those fixed means of access.
- Reference of the measure
- US ISO 14122-2:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- non-powered working platforms and walkways which are a part of a stationary machine
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US IEC 60227-6: 2001, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 6: Lift cables and cables for flexible connections
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard details the particular specifications for both circular and flat lift cables and cables for flexible connections of rated voltages up to and including 450/750 V. Each cable complies with the appropriate requirements given in US IEC 60227-1, and with the particular requirements of this part of US IEC 60227.
- Reference of the measure
- US IEC 60227-6: 2001
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Polyvinyl chloride insulated cables
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-24:2010, Fire detection and alarm systems — Part 24: Sound-system loudspeakers
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, for loudspeakers intended to broadcast a warning of fire between a fire detection and alarm system and the occupants of a building (see US ISO 7240-1). This standard specifies loudspeakers for two types of application environment: type A, generally for indoor use, and type B, generally for outdoor use. This standard does not cover loudspeakers for special applications, for example loudspeakers for use in hazardous applications, if such applications require additional or other requirements or tests other than those given in this standard. This standard is not intended to cover addressable loudspeakers or loudspeakers with active components.
- Reference of the measure
- US ISO 7240-24:2010
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fire detection and alarm systems — Sound-system loudspeakers
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 14122-3:2016, Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives requirements for non-powered stairs, stepladders and guard-rails which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, slidable) and movable parts of those fixed means of access.
- Reference of the measure
- US ISO 14122-3:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- non-powered stairs, stepladders and guard-rails
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US IEC 60227-7:2012, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 7: Flexible cables screened and unscreened with two or more conductors
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard details the particular specifications for polyvinyl chloride insulated, screened and unscreened control cables of rated voltages up to and including 300/500 V. All cables comply with the appropriate requirements given in US IEC 60227-1 and each individual type of cable complies with the particular requirements of this part.
- Reference of the measure
- US IEC 60227-7:2012
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- polyvinyl chloride insulated, screened and unscreened control cables
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-25:2010, Fire detection and alarm systems — Part 25: Components using radio transmission paths
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, for components used in fire detection and alarm systems, installed in and around buildings, which use radio-frequency (r.f.) transmission paths. It specifies requirements for the assessment of conformance of the components to the requirements of this standard. Where components work together and this requires knowledge of the system design, this standard also specifies requirements for the system. When the fire detection and alarm system uses wired and r.f. transmission paths, the relevant parts of US ISO 7240 apply together with this part of US ISO 7240. Requirements relevant to wire transmission paths are superseded or modified by those included in this standard. This standard does not restrict the intended use of radio spectrum, e.g. frequency, power output of devices;the allowed maximum number of the components using r.f. transmission paths within the fire detection and alarm system or one wire transmission path and/or r.f. transmission path; andthe allowed maximum number of the components affected by loss of one wire transmission path and/or r.f. transmission path.
- Reference of the measure
- US ISO 7240-25:2010
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fire detection and alarm systems — Components using radio transmission paths
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 14122-4:2016, Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives requirements for fixed ladders which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, slidable) and movable parts of fixed ladder systems.
- Reference of the measure
- US ISO 14122-4:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- fixed ladders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US IEC 60086-1: 2011, Primary batteries — General
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is intended to standardize primary batteries with respect to dimensions, nomenclature, terminal configurations, typical performance, safety and environmental aspects. As a primary battery classification tool, electrochemical systems are also standardized with respect to system letter, electrodes, electrolyte, nominal and maximum open circuit voltage.
- Reference of the measure
- US IEC 60086-1:2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- primary batteries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-27:2009, Fire detection and alarm systems — Part 27: Point-type fire detectors using a scattered-light, transmitted-light or ionization smoke sensor, an electrochemical-cell carbon-monoxide sensor and a heat sensor
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, for multi-sensor point-type fire detectors that incorporate an optical or ionization smoke sensor, an electro-chemical cell for sensing carbon monoxide (CO) and, optionally, one or more heat sensors, for use in fire detection and alarm systems installed in buildings (see US ISO 7240-1). For the testing of other types of fire detectors using smoke, CO and, optionally, heat sensors working on different principles, this standard can be used only for guidance. Fire detectors using smoke, CO and, optionally, heat sensors which have special characteristics and which have been developed for specific risks are not covered by this standard.
- Reference of the measure
- US ISO 7240-27:2009
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Point-type fire detectors using a scattered-light, transmitted-light or ionization smoke sensor, an electrochemical-cell carbon-monoxide sensor and a heat sensor
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 17916:2016, Safety of thermal cutting machines
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the safety requirements and measures for machinery covering design, construction, production, transport, installation, operation, maintenance, and putting out of service. This standard applies to machinery using thermal cutting and or marking processes such as oxy-fuel, plasma arc. This standard applies to machinery the basis of which is either designed as open gantry, cantilever machine, or the track of which is incorporated in the cutting table.
- Reference of the measure
- US ISO 17916:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- machinery
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US IEC 60086-2: 2011, Primary batteries — Part 2: Physical and electrical specifications
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to primary batteries based on standardized electrochemical systems. It specifies the physical dimensions and the discharge test conditions and discharge performance requirements.
- Reference of the measure
- US IEC 60086-2: 2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- primary batteries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US IEC 60086-3: 2011, Primary batteries — Part 3: Watch batteries
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies dimensions, designation, and requirements for primary batteries for watches.
- Reference of the measure
- US IEC 60086-3: 2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Watch batteries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 20187:2016, Inflatable play equipment — Safety requirements and test methods
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to inflatable play equipment intended for use by children up to 14 years of age individually and as a group activity. This standard specifies safety requirements for inflatable play equipment for which the primary activities are bouncing and sliding.
- Reference of the measure
- US ISO 20187:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- inflatable play equipment
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US IEC 60086-4: 2007, Primary batteries — Part 4: Safety of lithium batteries
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for primary batteries to ensure their safe operation under intended use and reasonably foreseeable misuse.
- Reference of the measure
- US IEC 60086-4: 2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- primary batteries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-28:2009, Fire detection and alarm systems — Part 28: Fire protection control equipment
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, for fire protection control equipment (f.p.c.e.) (see ISO 7240-1) connected to automatic fire protection equipment (a.f.p.e.) (see ISO 7240-1) installed in buildings. The f.p.c.e. receives signals from control and indicating equipment (see ISO 7240-1), sends control signals to, and indicates the condition of, the a.f.p.e. The control signals are used to initiate automatic fire protection equipment, such as pumps associated with fire suppression systems, control doors, dampers, fans and the like.
- Reference of the measure
- US ISO 7240-28:2009
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fire protection control equipment
Countries/Regions affected by the measure.
B7: Product quality, safety or performance requirements
